- Contact Person : Mr. Wang Jonathan
- Company Name : Shanghai Wei Rui Electronics Technology Co., Ltd.
- Tel : 86-021-64140831
- Fax : 86-021-64140831
- Address : Shanghai,shanghai,Room 1106, 1#, Xindong Office Building, No.388, Xin Fu Road, Minhang District, Shanghai, China
- Country/Region : China
DB6000Bridge/AP D217T:built-in antenna dual-module wireless bridge
DB6000Bridge/AP D217T 1.IEEE802.11a/b/g wireless bridge2.bulit-in5.8GHz 23dBi antenna3.dual module
DB6000Bridge/AP D217T of DoubleCom is a dual band, tri-mode ABG carrier-class wireless device which is interchangeable, high-performance, high-bandwidth, multi-functional and outdoor-type. The device has the features that it has the two-way RF Output. One mode supports IEEE802.11a/b/g and is built in 5.8G23dBi antenna, whose owns maximum transmitting power is 200mw. The other mode supports IEEE802.11a/b/g, whose maximum transmitting power at 5.8G is 400mw, and at 2.4G 600mW. The bandwidths of the two-way RF modules are independent, reaching 108Mbps respectively. It has many non-overlapping channels and owns strong anti-interference ability and high bandwidth, which makes it able to offer industry-leading wireless solutions.
DB6000Bridge/AP D217T has all wireless modes—— the Access Point (AP), Bridge Point to Point (PTP), Point to Multipoint (PTMP) Connections, Wireless Client (APclient), the Wireless Distribution System (WDS), MESH, Virtual AP, multi-VLAN supported ,etc., and also the features——NAT, Routing, DHCP, user authentication management, firewall, VPN, bandwidth management, QoS, and other functions.
Technology Specifications | DB6000Bridge/AP D217T |
RF | |
Band | IEEE11b/g 2.400~2.4835GHz IEEE11a 5.180~5.825 GHz |
RF Power Output(EIRP) | Module 1:11a/b/g 20dBm;Module 2: 11b/g 28dBm |
Sensitivity | -92dBm @11M/6Mbps -78dBm @ 48Mbps -74dBm @ 54Mbps |
Modulation | DSSS,OFDM |
Data and Operating Parameters | |
Automatic Rate Selection | IEEE802.11b 1/2/5.5/11Mbps IEEE802.11a/g 6/9/12/18/24/36/48/54/72M/96M/108Mbps |
Data Link Automatic Reset | Yes |
Standard | IEEE 802.11b,IEEE 802.11g,IEEE802.11a,IEEE802.3d,IEEE802.3u |
Supported Protocols | NSTREME,CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5 |
Management | |
Mode | AP,Bridge,Station,Wds,Wds-station ,etc. |
Device Reset | Software without having to open the casing |
Site and the use of the channel to detect | Yes |
Receive level display | Yes |
Security | |
MAC Address Control | Yes |
WEP encryption | 40/104 bit WEP WPA pre-shared key |
802.1x | Yes |
Hardware | |
CPU | 680MHz |
SDRAM | 64M |
LAN/WLAN | RJ-45*1 RF(N-K)*1 |
Power | DC 9-28 Volt + 5% 2A (Max.) AC adapter AC 90V ~ 264V, Five-line remote-powered(POE) |
Environment and physical properties | |
Temperature | -30~70°C |
Storage Temperature | -35~80°C |
Humidity (non-condensing) | ≤95% (Non-condensing) |
Antenna | Built-in 23dBi directional antenna, horizontal/vertical radiation lobe angel 12° |
Weight | About 2.8kg |
Current Consumption | 10W(Max) |
Fixed | PRC rod bolt, Hold rod diameter ψ30~ψ55mm/ Hoisting |
Special design | Wind, rain, sun, dust, shock and thermal proof design |
DB6000Bridge/AP D217T:built-in antenna dual-module wireless bridge