Shanghai Wei Rui Electronics Technology Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Wang Jonathan
  • Company Name : Shanghai Wei Rui Electronics Technology Co., Ltd.
  • Tel : 86-021-64140831
  • Fax : 86-021-64140831
  • Address : Shanghai,shanghai,Room 1106, 1#, Xindong Office Building, No.388, Xin Fu Road, Minhang District, Shanghai, China
  • Country/Region : China

DB6000 Bridge/AP D212T: built-in antenna dual-module wireless bridge

DB6000 Bridge/AP D212T: built-in antenna dual-module wireless bridge
Product Detailed
DB6000 Bridge/AP D212T 1. built-in 5.8G 23dBi antenna wireless bridge/ap 2. 802.11a/g/b 3. 108Mbps 4.dual modules

DB6000 Bridge/AP D212T1. built-in 5.8G 23dBi antenna wireless bridge/ap2. 802.11a/g/b 3. 108Mbps4.dual modules

    DB6000 Bridge/AP D212Tof DoubleCom is a tri-mode ABG carrier-class wireless device which is interchangeable, high-performance, high-bandwidth, multi-functional and outdoor-type. The device has the features that it has the two-way RF Output and owns the 5.8G maximum transmitting power of 200mw and the 2.4G maximum transmitting power of 400mw, and one of modes is built in a 5.8G23dBi antenna. The bandwidths of the two-way RF modules are independent, reaching 108Mbps respectively.

     DB6000 Bridge/AP D212T, which supports the IEEE802.11 a / b / g modes, can work in the licensed bands of 2.4G and 5.8G and support three kinds of operating frequencies——5/10/20MHZ. Moreover, it has many non-overlapping channels and owns strong anti-interference ability and high bandwidth, which makes it able to offer industry-leading wireless solutions. The device has all wireless modes—— the Access Point (AP), Bridge Point to Point (PTP), Point to Multipoint (PTMP) Connections, Wireless Client (APclient), the Wireless Distribution System (WDS), MESH, Virtual AP, multi-VLAN supported ,etc., and also the features——NAT, Routing, DHCP, user authentication management, firewall, VPN, bandwidth management, QoS, and other functions.

Technology Specifications

DB6000 Bridge/AP D212T

RF

Band

IEEE11b/g 2.400~2.4835GHz     IEEE11a 5.180~5.825 GHz

RF Power Output(EIRP)

Module 1/Module 2  11a 23dBm 11b/g 26dBm

Sensitivity

-92dBm @11M/6Mbps  -78dBm @ 48Mbps  -74dBm @ 54Mbps

Modulation

DSSS,OFDM

Data and Operating Parameters

Automatic Rate Selection

  IEEE802.11b  1/2/5.5/11Mbps

  IEEE802.11a/g  6/9/12/18/24/36/48/54/72M/96M/108Mbps

Data Link Automatic Reset

Yes

Standard

  IEEE 802.11b,IEEE 802.11g,IEEE802.11a,IEEE802.3d,IEEE802.3u     

Supported Protocols

  NSTREME,CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5

Management

Mode

AP,Bridge,Station,Wds,Wds-station ,etc.

Device Reset

Software without having to open the casing

Site and the use of the channel to detect

Yes

Receive level display

Yes

Security

  MAC Address Control

Yes

    WEP encryption

40/104 bit WEP WPA pre-shared key

802.1x

Yes

Hardware

CPU

600MHz

SDRAM

64M

LAN/WLAN

RJ-45*1 RF(N-K)*1

Power

DC 9-28 Volt + 5% 2A (Max.)  AC adapter AC 90V ~ 264V, Five-line remote-powered(POE)

Environment and physical properties

Temperature

-40~70°C

Storage Temperature

-45~80°C

Humidity (non-condensing)

≤95% (Non-condensing)

 Antenna

Built-in 23dBi directional antenna, horizontal/vertical radiationlobe angel 12°

Weight

About 1.77kg

Current Consumption

10W(Max)

Fixed

PRC rod bolt, Hold rod diameter  ψ30~ψ55mm/ Hoisting

Special design

Wind, rain, sun, dust, shock and thermal proof design

DB6000 Bridge/AP D212T: built-in antenna dual-module wireless bridge



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.